Utility not accepting cor...
Utility not accepting correct username/password as being correct
- 主页
- 后台控制中心
- Community Forum
- Services
- Dynamic DNS Service
- Utility not accepting correct username/password as being correct
- Community Forum
- Utility not accepting correct username/password as being correct
Topic: Utility not accepting correct username/password as being correct
Your update utility is not accepting my correct username and password as being correct. Please help. Regards -Joe08:57:43 PM>[badauth] Username vipserve or password is invalid! Please check the settings and try again.08:57:43 PM>Server response: badauth08:57:42 PM>Detecting IP from both client and server side.08:57:42 PM>Updating IP address for username vipserve.
Reply with quote | Report
According to our log files, you have put 'US' in the 'Location' field in the client software, but you did not assign the location to the hostname in the control panel, which is causing the 'badauth' error. You can either empty the 'Location' field in the client software or set a 'Location' name for vipserve.dynu.com in the control panel to solve this issue.
Reply with quote | Report
same problem here. i did not put any location but invalid user/password ?username openseven
Reply with quote | Report
Re: Re: Utility not accepting correct username/password as being correct
by timothytw on 2015年10月13日
openseven wrote:same problem here. i did not put any location but invalid user/password ?username openseven
Reply with quote | Report
Re: Re: Utility not accepting correct username/password as being correct
by doogleaelf on 2015年10月16日
timothytw wrote:According to our log files, you have put 'US' in the 'Location' field in the client software, but you did not assign the location to the hostname in the control panel, which is causing the 'badauth' error. You can either empty the 'Location' field in the client software or set a 'Location' name for vipserve.dynu.com in the control panel to solve this issue.
Reply with quote | Report
| Author | Topic: Utility not accepting correct username/password as being correct |
|---|---|
|
Jeremy Thomas Joined: 2015/8/20 
|
Utility not accepting correct username/password as being correct 2015年8月20日 11:04
Your update utility is not accepting my correct username and password as being correct. Please help. Regards -Joe08:57:43 PM>[badauth] Username vipserve or password is invalid! Please check the settings and try again.08:57:43 PM>Server response: badauth08:57:42 PM>Detecting IP from both client and server side.08:57:42 PM>Updating IP address for username vipserve.
|
|
timothytw Joined: 2002/5/2
|
Utility not accepting correct username/password as being correct 2015年8月24日 9:53
According to our log files, you have put 'US' in the 'Location' field in the client software, but you did not assign the location to the hostname in the control panel, which is causing the 'badauth' error. You can either empty the 'Location' field in the client software or set a 'Location' name for vipserve.dynu.com in the control panel to solve this issue.
|
|
openseven Joined: 2015/10/9 
|
Utility not accepting correct username/password as being correct 2015年10月10日 9:19
same problem here. i did not put any location but invalid user/password ?username openseven
|
|
timothytw Joined: 2002/5/2
|
Utility not accepting correct username/password as being correct 2015年10月13日 8:49
|
|
doogleaelf Joined: 2015/10/8
|
Utility not accepting correct username/password as being correct 2015年10月16日 0:56
|
It is currently 2024年11月22日 16:29 US Mountain Standard Time
2024年11月22日 16:29